several factors for selecting the UV LED curing machine

 1,  how to calibrate the energy of UV LED  system

Usually a process condition or test data, can not be separated from the quantitative conditions. For UV LED curing machines, UV energy meters are required to measure the energy and intensity of UV, a UV energy for UV LED curing machines is essential. GST-101A 201A is a highly economical UV curing machine with energy meter, the United States UIT is also a good UVLED energy meter. Here special note, the mercury lamp energy meter and LED-type UV light source energy meter is still different, so we recommend that if you buy the LED UV light or UVLED energy measurement power and energy will be quasi-some.

uvled line light source, uvled point light source, uvled surface light source, 405nm speaker curing light source, uvled inkjet printing light source, UVLED irradiation machine, UV light curing machine, UVLED curing machine, uv curing light source, Light source, uvled surface light source, 405nm speaker curing light source, uvled inkjet printing light source, UVLED irradiation machine, UV light curing machine, UVLED curing machine, uv curing light source,

    2, how to accurately control the UV LED energy?

    For UV LED curing machine: UV LED energy (mJ / cm2) = UV intensity (mW / cm2) * exposure time (S); so the UV LED intensity and exposure time of the precise control, you can precisely control the UV LED energy The On the exposure time control, our advanced UV LED curing machine, built-in computer microprocessor, you can set the exposure time and a variety of modes. On the UV LED intensity control, we use the computer to adjust the percentage to control, can now do 0% -100%. Because we can do UV LED technology that point light.

    3,  what is UV LED spectrum ?

At present, due to the development of light curing, there are many applications, such as surface curing, visible light curing, there are some UVA UVB or visible light bulb, advanced UVLED curing machine, generally can be equipped with different spectra without any hardware changes, This can greatly increase the flexibility of research and development. UVLED curing machine will eventually be the trend of the future, the current Heite Ned developed a new machine, man-machine interface UVLED curing machine, interested, then you can come to visit the test performance.

uvled light source, uvled point light source, uvled surface light source, 405nm speaker curing light source, uvled inkjet printing light source, UVLED irradiation machine, UV light curing machine, UVLED curing machine, uv curing light source,

    4, What is UVLED curing machine strength distribution ?

In general, UV UV curing machine UV intensity is very uniform, almost no change in UV intensity. GOOD microprocessor full-function curing machine, with high-tech LED and high-tech optical lens, the intensity range of 1000mw / cm2-13000mw / cm2. Do not choose some no data so-called "uniform" UV LED curing machine. Used in the curing and printing curing ink is not a problem

    5, stability and reliability

    This traditional process is difficult to directly prove that the general is the accumulation of industrial experience. General laboratories are usually not equipped with machines, and an unstable light source seriously affects the relevant test schedule. And we have a rigorous test report of the Japanese laboratory, the test data is much higher than the international standard, the current test is more stable when the Korean lamp beads.

 6, safety and temperature control

    Advanced UV LED curing machine with a lock security, automatically shut down the shutter, to protect user safety. Some other designs, including cutting-edge thermal chip technology and computer microprocessor functions, effectively control the temperature rise. This requires special attention, the traditional mercury lamp temperature is not well controlled light source, will cause a serious danger of light bulb burst, UVLED is cold light source, low temperature, there is no such hidden danger, you can rest assured that use.